Water-based asphalt anti-corrosion paint, an environmentally friendly anti-corrosion coating applied to pipes

Water-based asphalt anticorrosion paint, an environmentally friendly anti-corrosion coating applied to pipes
product characteristics:
this product is based on water-based resin, emulsified coal coking asphalt, modified epoxy resin, additives, fillers and other ground.
products:
asphalt paint can be used for concrete, steel structure corrosion and wet tropical or chemical environmental instruments, equipment protection coatings. The paint is widely used in underwater steel structures and cement components of anti-corrosion and leakage prevention, underground pipes and gas storage cabinet under the water tank protection, high-temperature areas along the coast, salt field of various mechanical anti-corrosion, chemical and other pipelines inside and outside wall corrosion
China
. He is also suitable for parts with high toughness requirements for substrate surfaces and coatings that are perennially humid or in construction environments.product characteristics:
water-based asphalt coating adhesion, paint film toughness is high, has superior water resistance, moisture resistance, good acid resistance, alkaline resistance, chemical resistance.
Construction Instructions:
. . surface treatment: coating should be applied in accordance with national standards or industry standards for the necessary oil removal, rust removal, de-contamination and other pre-treatment;
. . recommended air spraying, in order to obtain a uniform and good coating film. Can also be used rolling coating, brush coating method construction;
. Before using the product, please fully mix to prevent local color difference, each construction interval is not less than 2 hours, the maximum interval is not required;
. In the construction process, if you need to reduce viscosity, you can add a moderate amount of clean water dilution, add water do not excessive, we recommend that the water should be less than 10%, when dilution should follow a small number of times the principle
. . . construction temperature ≥5 degrees C, relative humidity ≤85%. Special construction environment requirements, such as temperature below 5 degrees C or more than 85% of the high humidity environment, can contact the manufacturers, according to special circumstances for the special deployment of products.
technical parameters:
color
optional
theory coating rate
3m2/KG (dry film 90 to 100 m)
appearance
flat
table dry (normal temperature)
≤2h
flexible
≤4h
solid (normal temperature)
≤24h
Impact strength
≥30
solid content
≥60%
water resistance (48h)
no significant change
Precautions:
. . . with leftover paint should be stored separately, when used again to maintain pH of 7.5 to 8.5;
. . . at the end of construction, all appliances should be immediately rinsed with clean water, to prevent drying;
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Please rinse with water and seek medical attention in time.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
: 20L iron drum
storage and transportation:
- Product effective storage period of 6 months, stored in a cool and ventilated place, storage temperature: 5 to 35 degrees C.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .