What are the dangers of not replacing the filter element in the purified water equipment?

Purified water equipment is designed according to actual needs.
The filter elements used in the process have a service life.
If they are not replaced in time, it will cause changes in water production.
What is the harm of not replacing filter elements in specific purified water equipment? The effect of purified water is weakened
.

The blocked filter element not only reduces the flow of water, but also reduces the filtering effect, resulting in a decrease in the "purity" of the purified water.
At this time, if consumers drink directly, they may absorb some harmful impurities into the body
.

The long-term overload of reverse osmosis purified water equipment will not only consume electricity, but also increase the cost
.

The current reverse osmosis purified water equipment is basically filtered step by step.
If the first-stage filter element - PP cotton is blocked, the large particles of impurities such as sediment and rust in the water will follow the raw water directly into the second-stage filter element - activated carbon.
Activated carbon, which is not originally responsible for filtering large particles of impurities, must bear this external burden, and overloading it will shorten its life very quickly
.

Shorten the life of reverse osmosis purified water equipment.
If the filter element is not replaced for a long time, it will be blocked by impurities in the water after a period of time, and the utilization rate of the filter element will also be significantly reduced
.

　　How much pressure the filter element of reverse osmosis purified water equipment can withstand mainly depends on the filtering material and the thickness of the porous plate that plays a protective role or the pressure bearing capacity of the spring
.

If it needs to withstand greater pressure, thicker perforated plates or thicker springs should be used
.

It is better to replace the filter element of the equipment, but if there is no reverse osmosis purified water equipment for a while, the equipment can also be simply activated
.

　　Remove the filter element of the reverse osmosis purified water equipment from the system, and immerse it in a container filled with clean gasoline.
When the dirt is bulky, tap the outside of the softened water equipment with a wooden stick to make the dirt fall off and soak in the gasoline.
After repeated cleaning, take it out, use dry nitrogen to repeatedly flush the two ports of the reverse osmosis purified water equipment, and then put it in clean gasoline for repeated cleaning
.


The above is the introduction of the harm caused by not replacing the filter element for a long time, and how to protect the filter element.
The filter element in the purified water equipment is very important, so we must pay attention to its performance changes
.