What aspects should be checked for the failure of the reactor?

What aspects do we need to check for the failure of the reactor?When there is leakage on the sealing surface, it means that the sealing ring is broken or the screw is loos.
At this time, we need to re-polish the sealing ring, or tighten the scre.
When there is leakage at the valve, the sealing surface of the valve needle and valve port is broke.
At this time, we need to replace the valve needle and valve agai.
When the outer magnet rotates, the inner magnet does not rotate, and the current decreases, that is, the temperature in the kettle is high, resulting in an unsmooth cooling cycl.
Under the action of high temperature, the inner magnet undergoes demagnetization and hydrogenation reaction, and the inner magnet sleeve Cracks appea.
At this time, we need to contact Shunfu Technology to replace the inner magne.
When there is a friction sound in the magnetic coupling drive, it means that the bushing and bearing are rubbing too much, resulting in excessive clearanc.
At this time, we need to contact Shunfu Technology to replace the bushing and bearin.