-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
- Cosmetic Ingredient
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Centrifuges are widely used in (eg, CDC, blood centers, animal husbandry and aquaculture, radioimmunity); research (laboratories, universities, research institutes, R&D centers); production (eg bioengineering, biopharmaceuticals, genetic engineering) , biochemistry, plant extraction, blood preparation, food processing, petrochemical, milk fat separation) and other fields
.
1.
The centrifuge should be placed on a level and firm floor or platform, and strive to keep the machine in a horizontal position to avoid machine vibration during centrifugation
.
2.
Turn on the power switch, install the required rotor as required, and place the pre-balanced sample on the rotor sample rack (the centrifuge tube must be balanced with the sample at the same time).
If there is only one sample tube, the other The support is replaced by water of equal quality; the centrifuge tube is placed in the casing symmetrically to prevent the body from vibrating.
Close the cover 3.
Press the function selection key to set various requirements: temperature, speed, time, acceleration and deceleration, with Computer-controlled machines also need to press the save key to memorize the input information
.
4.
When starting the centrifuge, cover the top cover of the centrifuge before starting slowly
.
5.
Press the start button, the refrigerated centrifuge will operate according to the above parameters, and automatically shut down at the predetermined time
.
.
1.
The centrifuge should be placed on a level and firm floor or platform, and strive to keep the machine in a horizontal position to avoid machine vibration during centrifugation
.
2.
Turn on the power switch, install the required rotor as required, and place the pre-balanced sample on the rotor sample rack (the centrifuge tube must be balanced with the sample at the same time).
If there is only one sample tube, the other The support is replaced by water of equal quality; the centrifuge tube is placed in the casing symmetrically to prevent the body from vibrating.
Close the cover 3.
Press the function selection key to set various requirements: temperature, speed, time, acceleration and deceleration, with Computer-controlled machines also need to press the save key to memorize the input information
.
4.
When starting the centrifuge, cover the top cover of the centrifuge before starting slowly
.
5.
Press the start button, the refrigerated centrifuge will operate according to the above parameters, and automatically shut down at the predetermined time
.