What is the difference between the load of the standard machine of the constant temperature and humidity test chamber and the energized load

What is the difference between the induced start-up and load of the constant temperature and humidity test chamber system? Induction start-up refers to people's test products put in the shell to do induction power lighting testing, through the detection hole to let the test product cable line be widened to the shell outside the switch power supply in the shell to carry out operation experiments, the test product "induction power" together will have heat, it is called "load"
.
So how is the "load" measured? Generally, the standard load of the constant temperature and humidity test chamber system produced by people is: net weight 30KG aluminum ingot, calorific value is 100W
.
If the load exceeds the standard machinery and equipment, then people's machine equipment system software evaluation is different, in the level of spare parts and system software must be increased, which means that the speed of the elevator temperature will be harmed, so in the effective communication at that time to pay attention
。 Refrigeration compressor oil filter common fault solution method, oil filtration refers to the car oil and its gas after the reduction, separation, to the cooling tower through water cooling, and then return to the gas barrel, before returning to the gas barrel according to the oil filter filter device to filter out the residue, to ensure that there is no residue into the engine, to prevent the engine residue and blockage and other conditions, it is the effect
of oil filter 。 For the solution of common faults of oil filter, a few points are briefly summarized: It is necessary to check whether the equipment can run normally or there is an abnormal situation, listen to the sound of the oil filter, if it is not noise, it indicates that the oil filter is normal
.
If the oil filter has an abnormal sound, then stop the equipment at this time, then remove the oil filter, and carry out the necessary inspection
of the oil filter.
The oil filter is very likely to accumulate a lot of different residues when the oil and its vapor residue are considered, so it is necessary to pay attention to the oil filter
after a period of time.
When cleaning the oil filter, you must use Du TE's chemical solution to clean it, which can ensure that the oil filter can clean up the waste
inside.
Screw compressor is a refrigeration compressor than the more common air compressor, screw refrigeration compressor common failure will endanger its application service life and the actual operation of the life safety of the staff itself, so in industrial production, master the screw compressor common faults of the problem and its treatment is very critical
.