What is the maintenance method of granule packing machine

The existence of particle packaging machine is to replace labor, improve the production efficiency of the company and reduce the cost of the enterprise If it is not well maintained after purchase, then its existence becomes the cost of the enterprise How should we maintain such a large mechanical equipment? The following are listed for you 1 Clean up the stolen goods, sundries and other articles on the machine before starting the machine 2 To replace different materials, first clean and disinfect the parts contacting the materials to make the machine work stably 3 Check whether the screws are loose If they are loose, tighten the corresponding tools 4 Check whether the equipment is required to be lubricated, and add lubricating oil to the moving parts such as horizontal seal, vertical seal, etc check whether the gearbox is lack of oil If so, please add corresponding lubricating oil 5 Turn on the power supply, operation switch and photoelectric sensor switch to check whether each indicator light is on or not If not, check or replace the fuse 6 Check whether the temperature control display is normal When the set value is higher than the actual temperature, the indicator light is green When the temperature reaches the set value, the indicator light is red 7 Turn on the operation switch and check whether the equipment has abnormal noise If any, shut down the equipment in time 8 In case of any fault that cannot be eliminated by the operator during the above inspection, please inform the maintenance personnel in time