What is the working process of syringe filling machine?

Syringe filling machine for robot filling and cannula of glass and plastic syringes, cartridges and bottles
.
The speed of two nozzles can reach 6000u/h, the speed of five nozzles can reach 12000u/h, and the speed of ten nozzles can reach 24000u/h
.
This syringe filling machine is compatible
with RAB or isolator housings.
The system can be used with stainless steel or ceramic rotary piston pumps or peristaltic pumps and can be filled
with mechanical or vacuum plungers as standard.
Automatic typesetting and discharging and piping
.
Cleanroom-style robots are used to position syringe filling and blockages
.
Manual or semi-automatic slag removal, manual, semi-automatic or automatic slag removal, 21CFR Part 11 and audit trail functions
are available.
Syringe filling machines can also be used to disengage syringes and cartridges, insert plungers and label.

So how does it work? 1.
Tray transfer Trays loaded with empty syringes are usually manually placed into the tray holder
.
After all the filling and sealing steps are completed automatically, the tray is manually removed and placed in
another empty syringe tray.
2.
Injection filling is realized by two independent servo motor controlled stopcock pumps
.
At the same time, the filling needle is controlled by a height-adjustable cam movement: an adjustment device is installed on the cam, which adjusts each filling action
according to the different dimensions of the syringe.
At the same time, a complete set of machinery is used to avoid the transition
between filling and filling needles.
3.
Rubber plug feeding The feeding and sequencing of rubber plugs
is realized by a feeding tray with a diameter of 300mm.
Then, by forming a plurality of linear feeding mechanisms, the rubber plug completes the entire feeding function
.
All parts in direct contact with the stopper should be made of AISI316L stainless steel
.
4.
Installation of rubber stoppers The installation of rubber plugs is based on the principle
of pipe rod and cam movement.
The depth of the rubber stopper inside the syringe tube can be controlled
by a height adjuster.
The adjustment range can reach 50mm
.
At the same time, a set of fiber optic sensing devices is used to avoid over-stuffing
.
5
.
Rubber stopper judgment through optical fiber sensor.