Which two conditions are available for the selection method of the glass reactor agitator

Glass reactor agitator a good selection method has two conditions, one is a reasonable choice result, one is a simple selection method, but these two points are often difficult to have at the same time.
the viscosity of the liquid has a great effect on the mixing state, it is a basic method to select the type according to the viscosity size of the mixing medium.
typical agitators have different ranges of use depending on the viscosity.
With the increase in viscosity of a variety of agitators in the order of use for propulsion, turbo, slurry, anchor and screw-type, etc. , here the propulsion type is divided into fine, put forward a large-capacity liquid with low speed, small-capacity liquid with high speed.
this selection chart does not absolutely specify the limits of the use of slurry type, in fact, the use of various slurry type range is overlapping.
the slurry type applicable to the process according to the purpose of the stirring process and the flow state caused by the agitator, which is a more suitable method.
the recommended slurry type is to divide the slurry type into two types, the former in the turbulence state, the latter in the strat current state operation.
the selection according to the purpose of stirring and flow status to determine the slurry type and bezel conditions, the flow status of the decision to be affected by the viscosity of the mixing medium.