echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Coating Technologies > Why does the exterior wall paint finish crack? How to avoid this pit?

    Why does the exterior wall paint finish crack? How to avoid this pit?

    • Last Update: 2020-10-01
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    Shortly after the completion of many buildings, the exterior paint finishes cracked, seriously affecting the aesthetics of the building, and the water seepage of the walls caused by cracking not only affected the function of the house, but also affected the structural safety of the building, which became a hidden danger to the quality of the project.
    , then, what is the cause of the cracking of the exterior paint finish? What are the preventive responses? The cause of the cracking of the exterior wall coating surface 1, the grass-roots cracked exterior wall coating finish for the cement mortar dust layer, in the condensation process will produce dry shrinkage and temperature difference contraction, if the outer wall dust construction operation is not proper, it is easy to cause empty drums, cracking.
    Before the construction of the coating surface without paying attention to repair and then enter the next process, after a period of time in the sun wipers, the internal cracks will gradually develop outwards, and the paint film is very thin coating surface is difficult to offset this internal stress, will follow the cracking.
    2, putty wall cracking due to the use of external wall putty quality defects, poor crack resistance, or due to improper construction operation, putty batch scraped on the wall because of dry shrink, cracking and thus affect the coating surface.
    3, coating surface cracking some of the paint has quality problems due to poor cracking performance, or due to improper construction, painting on the wall soon, after the wind and sun prone to dry cracking and other quality problems.
    Exterior wall paint finish cracking construction precautions 1. Exterior wall mortar surface layer construction (1) external wall dusting with cement mortar ratio to choose the appropriate, generally using 1:2.5 mortar is appropriate, try not to use 1:1 or 1:2 cement mortar.
    of cement is too large, the mortar shrinkage is large, easy to produce cracks.
    (2) in strict accordance with the external wall ash operation procedures and process construction, before the dust must be carefully removed from the grass surface dust, dirt, oil stains and brick wall ear ash.
    the day before the construction must be watered through the wall, after the completion of the construction of 24h, must be watered for conservation, the number of watering times per day should be determined according to climate conditions, at least twice a day, maintenance time of not less than 7 days.
    (3) If the construction in the season of sufficient sunshine, should be scientifically arranged construction time, to avoid the construction in the sun, or take effective sun protection measures to ensure that the mortar surface of the yin dry, to prevent the dust mortar layer due to the sun drying too fast caused by cracking.
    (4) cement mortar ash surface layer should not be too large, make full use of the subgra seam can adjust the contraction of cement mortar.
    construction of the use of triangular or trapezoidal section of the wooden strip, cement mortar surface layer for the grid, the same construction section is not allowed to appear construction seam joints, the section seam should have inlay paste seam.
    construction of the outer wall putty layer (1) the construction of the outer wall putty layer shall begin after the ash layer has reached the maintenance period.
    (2) putty batch before scraping should be dust mortar layer inspection, the appearance of empty drums, cracks in the site 2 to 3d in advance to repair.
    remove dust from the ash surface layer, float the sand, and keep the dust layer clean.
    (3) strictly in accordance with the requirements of the construction specifications and product description construction, to ensure that putty layer and dust layer bonded firmly, not cracked.
    also in the construction to avoid sun exposure work, to ensure that the putty layer in a dry state.
    (4) putty layer after the completion of the grinding process should be timely maintenance, and at the same time wash away the powder generated by grinding, so that the wall clean, in order to enter the paint surface construction.
    3. Before the construction of the coating surface layer (1) the coating surface layer is constructed, it should be ensured that the putty layer is flat, solid, clean, free of crisps, powdering, peeling and other defects, such as defects should be repaired in a timely manner in the inspection.
    (2) According to the paint finish construction specifications and paint product requirements, putty base moisture content of 8% to 10% or less before the paint surface painting construction.
    of putty in the construction of the paint is the key to ensure that the coating surface is firmly bonded and does not crack.
    Brushing outer wall latex paint (3) paint surface layer according to different functions, the use of different materials divided into several layers of brushing, the last layer of brushing construction must ensure that the previous layer of paint film surface dry and then carried out, at room temperature each interval of 2 to 4h, the construction environment temperature should be above 5oC.
    each paint film before painting to carry out a careful inspection of the upper process, confirm qualified re-construction.
    (4) according to the construction process and product requirements, the grass-roots ph value is required at less than 10.
    So, the construction must first be painted with an anti-alkali primer, its anti-mold, antibacterial, anti-acid and alkali performance is good, the putty layer penetration is strong, can fully ensure that the coating layer and putty layer bonding firmly.
    (5) coating surface construction, shall not be carried out in the wind level 4 or above, or rainy days, foggy days and relative humidity of more than 85% of the environment, to prevent high winds from dust pollution paint, as well as to ensure the dry construction surface.
    should also try to avoid construction in the hot sun or hot weather.
    : This number remains neutral on reprints, sharing, statements and opinions for the purpose of industry exchange only, and the copyright is owned by the original author.
    copyright and intellectual property rights and other infringement issues, please contact this number back office, immediately delete the content processing.
    , the convergence of all the great.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.