-
One-time use calcium carbide packaging steel drum (3)
Time of Update: 2021-09-22
2m according to the following method:a) The first drop (using 3 samples): The diagonal of the sample is perpendicular to the impact surface, and the center of gravity of the sample passes through the impact point and hits the impact plate with the edge of the bottom of the barrel .
-
Single-use calcium carbide packaging steel drums (Appendix A)
Time of Update: 2021-09-22
The vent hole and the nitrogen filling hole have bolts, nuts, steel round washers, sealing washers, and sealing gaskets.
2 The shape and size of the exhaust hole, nitrogen filling hole, and nut before assembly can be as specified in Figure A.
-
Repetitive use of calcium carbide packaging steel drums (2)
Time of Update: 2021-09-22
4. 1 The paint film is flat and smooth, with uniform color, without obvious defects such as loss of gloss, discoloration, flow, and wrinkles .
3. 1 The thickness of the paint film shall be measured according to the method of GB/T13452.
-
One-time use calcium carbide packaging steel drum (4)
Time of Update: 2021-09-22
1 Steel drums shall be inspected by the quality supervision department of the manufacturer in accordance with this standard, and a certificate of conformity shall be issued .
2. 2 The sampling number of each item shall be in accordance with Table 2 .
-
One-time use calcium carbide packaging steel drum (2)
Time of Update: 2021-09-22
3 The exterior paint of the steel drum adopts materials with strong adhesion, weather adaptability and durability .
3. 3 Appearance quality regulations of steel drums3.
4. 3 Inspection of paint film adhesionDetermined according to the method specified in GB/T325-2000 .
-
Repetitive use of calcium carbide packaging steel drums (1)
Time of Update: 2021-09-22
1 ScopeThis standard specifies the requirements, test methods, inspection rules and signs, transportation and storage of steel drums for repetitive use of calcium carbide packaging .
2-2008, ISO2808:2007, IDT)GB/T17344 Packaging and packaging container air tightness test method3 requirements3.
-
Repetitive use of calcium carbide packaging steel drums (4)
Time of Update: 2021-09-22
1. 3 The factory inspection of steel drums shall be carried out one by one according to the air tightness test in 3.
5. If one sample is unqualified, the factory inspection of the batch of products shall be judged as unqualified .
-
One-time use calcium carbide packaging steel drum (1)
Time of Update: 2021-09-22
1 ScopeThis standard specifies the requirements, test methods, inspection rules, markings, transportation and storage of single-use calcium carbide packaging steel drums .
GB190 dangerous goods packaging markGB/T191 Packaging, Storage and Transportation Graphic Mark (GB/T191-2008, ISO780: 1997, MOD)GB/T325-2000 Packaging Container Steel DrumGB/T912 carbon structural steel and low-alloy structural steel hot-rolled sheet and steel stripGB/T4857.
-
Repetitive use of calcium carbide packaging steel drums (Appendix A I)
Time of Update: 2021-09-22
2 The shape and size of the flange ring should meet the requirements of Figure A.
3 The shape and size of the sealing ring should meet the requirements of Figure A.
-
Repetitive use of calcium carbide packaging steel drums (Appendix A 2)
Time of Update: 2021-09-22
7 The shape and assembly relationship of the closure (reinforcement of the upper part of the top of the bucket)Table A.
1 The shape and size of the reinforcement ring should meet the requirements of Figure A.
-
Repetitive use of calcium carbide packaging steel drums (3)
Time of Update: 2021-09-22
2. 5 Criteria for passing the testAfter the sample is dropped, the contents are not withdrawn .
