8 key points of colorful paint production and construction!

Multicolor coatings will inevitably encounter such and other problems during production and construction, such as color dot size, material compatibility, storage, stability, cracking, blooming, etc.

01 How to control the size and color point of colorful paint?

Observe the size of the color particles, if the color particles are too small, re-produce

In water-in-water production, it is generally more natural to use the dispersing disc to granulate the particles, which is more natural.

02 What should I do if the particles are too soft during the preparation of the colorful paint?

According to the actual situation, the powder content can be appropriately increased, and an excellent protective glue can be selected! At present, a more effective method is to select emulsions with a higher glass transition temperature for blending, which can increase the hardness of the particles

03 What happens if the amount of colorful paint emulsion is low?

If the amount of emulsion of the colorful paint is low, the color retention, UV resistance, adhesion and other product properties of the corresponding product will be reduced; on the contrary, if there is too much emulsion, the wall will not be easy to dry after painting

04 What should I do if the colorful paint is sprayed on the wall?

As the saying goes, one-third of the material, seven-division of work! Even the best materials need to be processed by the construction master.

05 What is the reason for the joint print of colorful paint?

This may be caused by the uneven spraying of the colorful paint or the uneven surface treatment.

06 How to solve the thick cracks caused by the water-in-water spray?

Water-in-water multicolor paints are made of latex and color paste.

07 Is it okay to use colorful paint without overcoat?

Multicolor paint is located in a complex outdoor environment, and can play a good protective effect on the main coating.

08 How to solve the storage stability of colorful paint?

Multicolor is a material in which water-based latex particles are dispersed in the emulsion medium, but do not blend with each other
.
Regardless of the package type or the reaction type, due to the volatilization of the coating components, the fusion of the color particles is only a matter of time.
Inferior products will appear delamination and mildew if stored for less than a week.
Good quality colorful paints will be stored for a long time.
The particle wrapping effect is good, and it can adapt to the long-term storage and long-distance bumpy transportation of the commercial paint site
.

To sum up, the quality of products is the top priority, especially in today's coatings market where sand-in-water-in-water is increasingly developing.
It is more important to ensure the quality of products from the source and maintain the normal operation of the coatings industry.
Man's due responsibility!