echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Coating Additive Market > Selection and recommendation of Evonik coating additives in high-solid formulations for vehicles

    Selection and recommendation of Evonik coating additives in high-solid formulations for vehicles

    • Last Update: 2020-11-05
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    With voC regulations becoming more stringent, traditional solvent-based coatings are difficult to meet both emission and construction requirements.
    Water-based coatings, powder coatings, UV coatings and high-solid coatings have obvious advantages in reducing VOC, especially high-solid coatings, which have the closest coating properties to traditional solvent-based coatings, making them one of the hot spots in coating research and development.
    high-solid coating requires a high-solid, low-viscosity main resin, limited addition of solvents in the formulation, and many challenges

    .
    ▪ Slow curing speed, it is difficult to adjust the drying speed with mixed solvents
    ▪ system surface pressure is higher and solubility is low, resulting in poor wetting, easy surface defects, affecting the flow level of these problems;
    ▪ high film thickness and harsh construction methods, such as airless spray or mixed air spray caused microblister problems

    In response to the difficulties and challenges faced by the above-mentioned high-solid coatings, Created Coating Additives offer a range of products such as dispersants, de-foaming agents, substrate moisturizers and leveling agents that can be applied to high-solid coatings to improve the appearance and performance of coatings.
    of this topic, so it will be presented in the next two chapters. This article will focus on:
    ✔ dispersant selection
    ✔ defleant selection
    01
    dispersant selection
    high solid content coating to meet VOC requirements, the amount of solvent added in the formula is very limited, if you do paint filler paint, you need dispersant with a strong anti-stick effect, so that the coating to maintain a low viscosity.
    TEGO® Dispers 670 is ideal for high-solid-containing formulations with excellent adhesion, color display and pigment stability, as well as for organic pigments, inorganic pigments and carbon black pigments.
    TEGO® Dispers 670 for titanium white powder Kronos 2310
    with excellent adhesion reduction and very low yield
    in other words, excellent fluidity and very low tentacleance
    TEGO® Dispers 670 for carbon black
    with excellent degiscosity and optimum viscosity stability
    TEGO
    The ® Dispers 670 is used for indigo blue
    with excellent anti-adhesive effect and optimum viscosity stability
    02
    deblister selection
    pain points for high solid-containing coatings




    In addition, the addition of formula solvents is very limited, it is not possible to adjust the rate of drying through solvent volatilization rate, resulting in a high-solid coating
    curing speed is
    .
    If you encounter some applications that can only be cured at room temperature
    and cannot be forced to dry, the reaction foam problem of high-solid 2K-PU coating will be more prominent than traditional solvent-
    based formulations
    In this way, the anti-foaming agent is used to eliminate the reaction bubbles or spray caused by the micro-bubbles.
    and high-solid coating formulation system because of the use of low molecular weight of the main resin, more sensitive to the compatible of desiccant, especially high-gloss paint, easy to affect visual aesthetics due to poor compatible reasons.
    TEGO ® Airex 990 and TEGO® Airex 991 are desmoulation products specifically developed for high-solid coating systems.
    can not only play a good balance between de-foaming strength and compatible, while the two products also have their own focus.
    TEGO® Airex 990
    High compatible
    suitable for varnishes and paints
    suitable for a wide range of spray applications
    TEGO® Airex 991
    De-foaming efficiency
    for paint
    especially for airless spray, mixed air spray and roll construction
    TEGO® Airex 990 for high-solid 2K-PU varnish
    excellent compatible
    deblication while aiding leveling
    also reduces the addition of leveling agents in formulations
    TEGO® Airex 991 for high-solid 2K-PU finish
    with excellent de-foaming performance
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.