Deshan white carbon black most conventional model introduction and application, recommended collection.

Original title: Deshan white carbon black most conventional model introduction and application, recommended collection . Deshan white carbon black REOLOSIL DM10 DM10characteristics: for the polar solvent system thickening and tacteration, rubber reinforcementapplications: silicone rubber, sealant, organic Elastomers, paints, inks, coatingsare used in the thickening and tactidation of polar solvent systems, rubber reinforcement REOLOSIL is developed with the unique technology of Japan's TokuyAMA company, with excellent fluidity and powder characteristics, to meet the user's new requirements for white carbon black.characteristics and functions of the white carbon black REOLOSIL DM-10 : the diameter of the first particles of the white carbon black DM-10 is 5-50nm, usually in um-mm fluffy coagulation, the distribution of particle size varies depending on the surface area.its surface structure and dispersed condensation structure, can make liquid resin and other thickening and have touch denaturation.the same time, Deshan white carbon black REOLOSIL DM-10 can also be used for the fluidity of powder materials and prevent solidification, and as rubber, elastomer strength materials, has been widely used.addition, the high purity and ultra-fine particles of the Deshan White Charcoal Black REOLOSIL DM-10 are being applied in a variety of fields.. 2. Deshan white carbon black TOKUYAMA DM-30Introduction: REOLOSIL is a gas phase silica powder product consisting of 5-50 nm of a particle produced by Japan's Tokuyama (TOKUYAMA), using its surface structure and dispersed condensation structure, can make liquid resin and other thickening and touch denaturation. At the same time can also be used for the fluidity of powder materials and prevent solidification, and as rubber, elastomers to strengthen fillers, has been widely used. In addition, it is being applied in a variety of fields, taking advantage of its high purity and ultra-fine particles.. TOKUYAMA Japan DM-30 anti-precipitation agent for organic bentonite ST-8D is based on natural sodium-based, calcium-based bentonite as raw material by a high degree of purification, modified, organic modified.performance: anti-subsidence, thickening, hydrophobic, increased stretch strength, tear strength, wear resistance and electrical insulation performance, its unique properties give many areas of products more advantages: such as silicone rubber, sealants, organic elastomers, paints, inks, coatings, adhesives, fluid powders. It can be used for thickening and tacteration of polar solvent systems, reinforcement of rubber, and fluidization of powders.. DM-30 composition: modified natural sodium base, calcium-based bentonite, silica appearance: rice white powderdispersion fineness: ≦30um main uses: 1, thickening performance, good anti-sinking, high transparency, can improve the performance of yellowing;2, has better dispersion performance and dispersion fineness, 3, no polarization agent, suitable for medium to high polar solvent system.4, LED package anti-precipitation starch.5, DM-30 is widely used in paints, inks, sealants, pigments, LEDs and so on.addition: anti-sinking agent DM-30 silicone polymer 10nm LED phosphor anti-subsidence 0.5 to 1%Japan's Deshan REOLOSIL gas phase silica DM 30 series:REOLOSIL gas phase silica has the following series: 1. Hydropicine type: QS-09 QS-10L CP-102 QS-102 QS-2 0 QS-20LS QS-30C QS-40 2. Hydrophobic type: One methyl triclosane surface treatment: MT-10 MT-10CII Methyl dichlorosilane surface treatment: DM-10 DM-30Hexamethyl disiliconate surface treatment: HM-20 HM-30ST ZD-30STspecial silicone oil surface treatment: KS-20SC PM-20L 3. Deshan White Charcoal Black QS-20LSIntroduction: QS-20LS is a hydrocarbon phase silica (white carbon black) with a surface area of 220m2/g, which is mainly used in silicone rubber (HTV, RTV), resin coatings, paints, inks, electronics, paper, cosmetics, toothpaste, adhesives, plastics and other industries in production, with good anti-precipitation, anti-hanging flow, thickening and degeneration, improve dielectric properties, promote free flow, self-clearing, etc., is an excellent effect of free flow aids, positive and negative system plus control agents, including sex groups (catalysts, etc.) carriers, granulation aids, processing aids, anti-blocking agents, stabilizers.characteristics: 1. Control of fluid systems, adhesives, polymers, etc. fluid and touch denaturation 2. Used as anti-sinking, thickening, anti-flow hanging additives 3. HRC high temperature silicone sulfide rubber and RTV-2K two-part room temperature silicon sulfide rubber complement 4. Improve the properties of the powder, improve mobility and anti-clot 4. Deshan white carbon black QS-20characteristics: the appearance of fluffy white powderapplications: water-based coatings, UV coatings, leather coatingscharacteristics: liquid systems, adhesives, polymers, such as fluid and touch denaturation control; HCR-RTV-2K silicone rubber complement, which can be used to regulate free flow and improve powder properties as an anti-clot agent.is an excellent effect of free-flow additives, positive and negative system plus control agents, including sex groups (catalysts, etc.) carriers, granulation aids, processing aids, anti-blocking agents, stabilizers, gas phase silica due to its unusual particle characteristics, so it is considered a good product in industry.particle size of silicon dioxide in the gas phase, with a large surface area. High purity and its tendency to chain make it self-made.in the role of -phase silica in product performance, it is important to change the flow characteristics of the product by forming an alternating mesh structure and causing the structure to be destroyed according to the size of the shear force present, so that the fluidity can be controlled according to the strict requirements of the configurant.unique effect of silicon dioxide in the gas phase is to be able to improve several different properties of the same product at the same time, which is difficult to achieve with other single substances or even several substances.when using gas-phase silica in coatings, adhesives, cosmetics, inks, plastics, and products such as glues, it can simultaneously improve or obtain thickening, touch denaturation, solid suspension and transparency. gas phase silica promotes the free flow of dry explosive powders, granules and pills, a properties that are useful in food, cosmetics and a variety of chemical industries. . 5. Deshan White Carbon Black Silica QS30 Introduction: For anti-sinking, thickening, reinforcement, touch agent hydromassage-type white carbon black " composition" gas phase method silica "Characteristics" conserbability is good: TOKUYAMA big surface area: 300 m2/g particle size: 7 nm burn reduction s 2 Wt.% PH value: 4.5 Deshan silica QS30 Application range: sealants, adhesives, building coatings, industrial coatings, water-based coatings l .
6. Deshan White Charcoal Black REOLOSIL QS40 . Features: Used as a tonic, thickener, anti-sink agent, tactidal agent and fluidizing agent Application: adhesive, paint, ink, fluid powder REOLOSIL QS40 is a very small particle size of high-purity silicon tetrachloride produced by burning in a hydrogen-oxygen flame. its unique materiality gives more advantage to products in many areas, such as silicone rubber, sealants, organic elastomers, UPRs, adhesives, paints, inks, fluid powders. it is used as a tonic, thickener, anti-sink agent, contact agent and fluidizing agent. special materiality: a large ratio of surface area and standard accumulation density original particle size: about 7nm Deshan white carbon black QS-40 is a larger than the surface area, 380m2/ g white powdered gas phase method silica, white carbon black QS-40 particle size is small, only 7nm, but not easy to disperse, transparency is very high, typically used in sealants, adhesives, inks and a variety of functional coatings. black conventional models: DM10, DM-30, QS-20LS, QS-20, QS30, QS40, Responsible Editor:
.