Water-based heat insulation and reflective coating formula

Introduction

The water-based heat-insulating and reflective coating formula has a reflectivity of 83.

Application field

Water-based heat-insulating and reflective coating formulations are used to improve the storage performance of warehouses (tanks) in petrochemical, grain and oil storage and other fields.

Recipe details

1.

2.

Production Method

Disperse deionized water, additives, pigments and fillers, heat insulation materials (or reflective materials) at high speed, then grind the slurry, and then add water emulsion type synthetic polymer emulsion, thickener, leveling agent, and mix well After filtering and testing, the primer (or topcoat) of the water-based heat-insulating reflective coating is obtained.

Precautions

The range of the mass ratio of each component of the water-based heat-insulating reflective coating formulation is as follows.

1. The range of primer components and mass ratios is : water-emulsion synthetic polymer emulsion 30-40, deionized water 15-30, thermal insulation material 10-30, pigments and fillers 5-20, and additives 5-10.
   
2. The composition and mass ratio of the topcoat range are : water emulsion type synthetic polymer emulsion 30~45, deionized water 15~30, reflective material 20~35, pigments and fillers 10~20, additives 4~10.