Wear-resistant flooring construction process

China Paint Online News Information

Wear-resistant flooring construction process:
1. Concrete base pouring: concrete strength label requirements of ≥C25, pouring thickness to customers to determine, generally more than 30mm cement mortar or more than 50mm fine stone concrete;
2. Ultra-hard wear layer construction: when the concrete initially condenses (refers to the pressure test left a 3-5mm imprint), first of all, 2/3 amount of alloy material vertical, cross evenly spread, so that the material fully absorbs water in the concrete, with the polish mechanical construction flattened;
3. Maintenance and cutting telescopic seams: after construction can be implemented with maintenance agents (water plus film, wax, high penetration seal curing agent); (Generally determined according to the distance of the workshop column), cutting should be unified bullet line, to ensure that the cutting seams are neat and straight, without affecting the beauty of the floor;
can be used normally after 28 days of maintenance.(see all the pictures on China Paint Online News)
Quartz quartz stone content of more than 99.98 percent in Luchun County, Hubei Province, the highest taste and hardness in the country; Widely used in Fivans coatings and wear-resistant flooring. Silica ash content is the second largest in the world. Cement: Zhang Zhidong, then governor of Huguang, in 1894 (guangxu twenty years), had sent samples from the Huangjing Mountain to Germany, entrusting the minister through the German chemist "stacked test detail", came to the conclusion that "the ore of Huangjingshan in Hubei Daye is the best raw material for the production of cement limestone".
So the Fivans wear-resistant flooring has more than the general wear-resistant floor more with high wear resistance, natural cyan, natural color, anti-heavy pressure, dust-free and so on.